Nissan Sentra B18 (2020-2025) Service Manual: Rear Axle :: Periodic Maintenance. Rear Wheel Hub. Inspection
Rear Wheel Hub. Inspection. Inspection
Inspection
COMPONENT PART
Check the mounting conditions (looseness, back lash) of each component and component conditions (wear, damage) are normal.
WHEEL HUB ASSEMBLY (BEARING-INTEGRATED TYPE)
Check the following items, and replace the part it necessary.
Move wheel hub assembly in the axial direction by hand. Check there is no looseness of wheel bearing.
|
Axial end play |
: Refer to Wheel bearing. |
Rotate wheel hub assembly and check there is no unusual noise or other irregular conditions. If there is any of irregular conditions, replace wheel hub assembly.
Other materials:
Intake Sensor
Diagnosis Procedure
Diagnosis Procedure
CHECK INTAKE SENSOR
Ignition switch OFF.
Remove intake sensor. Refer to Removal and Installation.
Check resis ...
Door Switch
Component Function Check
Component Function
Check
CHECK FUNCTION
CONSULT
Select "Door switch AS", "Door switch DR", "Door
switch RL" or "Door switch RR" in "Data Monitor" mode of "BCM(DOOR
...
B1500-92 Door Satellite Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen items
(Trouble diagnosis
content)
DTC Detection Condition
...