Special Service ToolDtc Confirmation Procedure
DTC Confirmation
Procedure
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Select “Self Diagnostic Result” mode of “BCM(AIR
PRESSURE MONITOR)”.
Is DTC “C1700-55” detected?
YES >>
Refer to DTC ...
Inspection and adjustment
Additional service when replacing control unit
Additional service when replacing control unit : description
Memory reset procedure
Please observe the following instructions at confirming the moonroof
operation.
Note:
Do not disconnect the electronic power while the moonroof is operating ...
Removal and Installation
Removal and
Installation
Warning:
Before servicing the SRS, place the ignition switch
in the OFF position, disconnect both battery terminals and wait at
least three minutes.
Always work from the side of air bag module. Do
...