Nissan Sentra B18 (2020-2025) Owner's Manual: Power steering
WARNING
- If the engine is not running or is turned off while driving, power steering
assistance will not be available.
In this situation, steering effort will increase significantly.
- If the power steering warning light illuminates while the engine is running, power assist will be disabled. Although you will retain steering control of your Nissan Sentra, steering will require more effort. Have the power steering system inspected as soon as possible. It is recommended that you visit a NISSAN dealer for service.
The power steering system is designed to provide steering assistance during normal driving, allowing the steering wheel to be operated with minimal effort.
If the steering wheel is turned repeatedly or continuously while parking or driving at very low speeds, the power steering assist may be temporarily reduced.
This reduction is intended to prevent overheating of the power steering system and to protect its components from damage. While assist is reduced, steering effort will feel heavier. Once the system temperature decreases, normal steering assist will be restored automatically.
Avoid prolonged or repetitive steering inputs that could cause the power steering system to overheat.
You may hear a noise when turning the steering wheel rapidly. This is a normal operating characteristic and does not indicate a malfunction.
If the power steering warning light illuminates while the engine is running, it may indicate that the power steering system is not functioning correctly and requires inspection.
Have the power steering system checked promptly. It is recommended that you visit a NISSAN dealer for this service.
When the power steering warning light remains illuminated with the engine running, steering assistance will not be available. You will still be able to control the Nissan Sentra, but increased steering effort will be required, particularly during low-speed maneuvers and sharp turns.
Other materials:
Its Can Communication Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK CAN DIAGNOSIS
Check the CAN diagnosis results from CONSULT
to see that the chassis CAN communication 2 circuit has no
malfunction.
Is the chassis CAN communication 2 circuit
normal?
YES >>
...
Starting System. Basic Inspection. Diagnosis and Repair Work Flow
Diagnosis and Repair Work Flow
Work Flow (with 165-Dss-5000p)
Work Flow (With
165-DSS-5000P)
STARTING SYSTEM DIAGNOSIS WITH 165-DSS-5000P
To test the starting system, use the following
special service tool:
Battery and electrical diagnostic analyzer 165-DSS-5000P.
...
P0454 Evap System Pressure Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...