Parking Brake Release Warning Chime
SYSTEM DIAGRAM
WARNING OPERATION CONDITIONS
If all of the following conditions are fulfilled:
|
Operation conditions |
|
|---|---|
|
Ignition switch |
ON |
|
Parking brake |
During the operation (parking brake switch ON). |
|
Nissan Sentra Vehicle speed |
Approximately 4.3 MPH (7 km/h) or more. |
WARNING CANCEL CONDITIONS
Warning is canceled if any of the following conditions are fulfilled:
|
Operation conditions |
|
|---|---|
|
Ignition switch |
OFF |
|
Parking brake |
Release condition (parking brake switch OFF). |
|
Nissan Sentra Vehicle speed |
Approximately 1.9 MPH (3 km/h) or less. |
SIGNAL PATH
Combination meter sounds integrated buzzer when it judges that parking brake release warning chime is necessary from signals below.
|
Signal name |
Signal source |
|---|---|
|
Ignition switch signal |
— |
|
Parking brake switch signal |
Parking brake switch |
|
Nissan Sentra Vehicle speed signal |
ABS actuator and electric unit
(control unit) |
Light Reminder Warning
Seat Belt Warning ChimePassenger Side
Component Function Check
Component Function
Check
CHECK FUNCTION
CONSULT
Select "DOOR LOCK" in "Active Test" mode of "BCM(DOOR
LOCK)".
Select “ALL LOCK” or ...
Front Pillar Finisher
Removal and Installation
Removal and Installation
REMOVAL
Partially
remove the front body side welt along the front pillar
finisher.
Using a
suitable tool, release clips and pawls of front pillar finisher
(1).
: Clip
:
Pawl
Using a
suitable tool, cut ...
Transverse link
Exploded View
Upper link
Front suspension member
Transverse link
Front
Removal and Installation
REMOVAL
Remove the wheel and tire using power tool. Refer to WT-47, "Exploded
View".
Remove the nut and bolt from the lower ball joint. Disconnect the
transverse l ...