S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information

Nissan Sentra B18 (2020-2025) Service Manual: P0531 A/c Refrigerant Pressure Sensor

Dtc Description

DTC Description

DTC DETECTION LOGIC

DTC No.

Trouble diagnosis name

DTC detecting condition

P0531

REFRIGERANT PRESS SENSOR A

(A/C refrigerant pressure sensor A circuit range/performance

ECM detects that input signal from the refrigerant pressure sensor is out of the specified range

POSSIBLE CAUSE

  • Harness or connectors

  • Refrigerant pressure sensor

FAIL-SAFE

Not applicable

Confirmation Procedure

Confirmation Procedure

  1. PRECONDITIONING

    If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

    1. Turn ignition switch OFF and wait at least 10 seconds.

    2. Turn ignition switch ON.

    3. Turn ignition switch OFF and wait at least 10 seconds.

    TESTING CONDITION:

    Before performing the following procedure, confirm that battery voltage is 11 V or more under ignition switch OFF condition.

    >>

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE

    1. Start engine and run it for at least 10 seconds at idle speed.

    2. Check 1st trip DTC.

    Is 1st trip DTC detected?

    YES >>

    Refer to DTC Diagnosis Procedure.

    NO >>

    INSPECTION END

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

  1. CHECK REFRIGERANT PRESSURE SENSOR

    Refer to Diagnosis Procedure.

    Is the inspection result normal?

    YES >>

    INSPECTION END

    NO >>

    Replace refrigerant pressure sensor. Refer to Removal and Installation(AUTOMATIC AIR CONDITIONER) or Removal and Installation(MANUAL AIR CONDITIONER).

    P052a Intake Valve Timing Control
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P052A CAMSHAFT POSITION TIMING B1 (Cold star...
    P0532 A/c Refrigerant Pressure Sensor
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. Trouble diagnosis name DTC detecting condition P0532 REFRIGERANT PRESS SENSOR A (A/C refrigerant pressure sensor A ci...

    Other materials:

    Unit Disassembly and Assembly
    Rear Combination Lamp (body Side) Exploded View Exploded View 1. Rear combination lamp 2. Stop/tail lamp bulb ...

    Body Sealing
    Description Description The following figure shows the areas which are sealed at the factory. Sealant which has been applied to these areas should be smooth and free from cuts or gaps. Care should be taken not to apply an excess amount of sealant and not to allow other unaffecte ...

    P0300 Misfire
    Dtc Description DTC Description When a misfire occurs, engine speed will fluctuate. If the engine speed fluctuates enough to cause the crankshaft position (CKP) sensor signal to vary, ECM can determine that a misfire is occurring. ...