Nissan Sentra B18 (2020-2025) Service Manual: Low Tire Pressure Location Indicator Does Not Display
Symptom Description
Symptom Description
When there is low tire pressure, the low tire location indicator does not display even though the low tire pressure warning lamp turns ON.
Diagnosis Procedure
Diagnosis Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
-
Activate and display TPMS sensor IDs
-
Display tire pressure reported by the TPMS sensor
-
Read TPMS DTCs
-
Register TPMS sensor IDs
-
CHECK COMBINATION METER
-
Check combination meter. Refer to Work Flow.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace error-detected parts.
-
-
CHECK LOW TIRE PRESSURE WHEEL LOCATION INDICATOR OPERATION
-
Check that the low tire pressure location indicator is turned OFF after it turns ON for approximately 1 second, when the ignition switch is ON.
Is the inspection result normal?
YES>>Check intermittent incident. Refer to Intermittent Incident.
NO>>Replace the BCM. Refer to Removal and Installation.
-
Other materials:
Dtc Diagnosis [8ch Can Gateway (8ch Can Gateway)]
B2600-42 Config Error
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detected
...
Preparation. Preparation
Preparation
Special Service Tool
Special Service Tool
The actual shape of the tools may differ from those
illustrated here.
Tool number
(TechMate No.)
Tool name
...
Diagnosis System (air Bag)
Description
Description
CAUTION:
Never use electrical test equipment on any
circuit related to the SRS unless instructed in this Service
Manual. SRS wiring harnesses can be identified by yellow and/or
orange harnesses or harness connectors.
...