Nissan Sentra B18 (2020-2025) Service Manual: Kicking Plate
Removal and Installation
FRONT
Removal
Using a
suitable tool, release pawls.
:
Pawl
Remove front kicking plate (1).
Installation
Installation is in the reverse order of removal.
REAR
Removal
Using a
suitable tool, release pawls.
:
Pawl
Remove rear kicking plate (1).
Installation
Installation is in the reverse order of removal.
Front Pillar Finisher
Removal and Installation
Removal and Installation
REMOVAL
Partially
remove the front body side welt along the front pillar
finisher.
Using a
suitable tool, release clips and pa ...
Dash Side Finisher
Removal and Installation
Removal and Installation
REMOVAL
Remove
front kicking plate. Refer to Removal and Installation.
Remove dash
side finisher.
Using
a suitable tool, r ...
Other materials:
Vanity mirror lamp
Removal and installation
Caution:
Do not attempt to separate the vanity mirror lamp from the sun visor or
damage to the components
may occur.
Note:
The vanity mirror lamp is replaced as part of the sun visor. Refer to
int-40, "removal and installation".
Bulb or lens replacement
...
Exploded View
Exploded View
1.
Steering gear and linkage assembly
2.
Outer socket (RH)
3.
...
Ecu diagnosis information
BCM
Reference value
Note:
The signal tech ii tool (j-50190) can be used to perform the following
functions. Refer to the signal tech ii
user guide for additional information.
Activate and display tpms transmitter ids
Display tire pressure reported by the tpms transmitter
Read TPMS DTCs ...
