Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Owner's Manual: Intelligent Driver Alertness (I-DA)

WARNING

Failure to follow the warnings and instructions for proper use of the Intelligent Driver Alertness (I-DA) system on the Nissan Sentra could result in serious injury or death.

The Intelligent Driver Alertness system helps notify the driver when a potential decrease in attention level or signs of driving fatigue are detected.

The system continuously monitors driving patterns and steering behavior over a period of time, comparing them to the driver’s normal operating behavior. If deviations suggesting reduced attention are identified, the Nissan Sentra provides visual and audible alerts encouraging the driver to take a rest break.

Intelligent Driver Alertness system operation

Intelligent Driver Alertness (I-DA) warning display on Nissan Sentra with 7 inch meter display
For vehicles with the 7 inch meter display

Intelligent Driver Alertness (I-DA) warning display on Nissan Sentra with 4.2 inch meter display
For vehicles with the 4.2 inch meter display

If the system determines that driver fatigue or reduced attention is present, the message “Take a break?” appears in the vehicle information display and an audible chime sounds when the Nissan Sentra is traveling at speeds above approximately 37 mph (60 km/h).

The system continues monitoring driver behavior throughout the trip and may issue multiple alerts if decreasing attention is detected again.

The Intelligent Driver Alertness system resets and begins reassessing driving behavior whenever the ignition switch is turned from the ON position to the OFF position and then back to the ON position.

How to enable/disable the Intelligent Driver Alertness (I-DA) system

Intelligent Driver Alertness (I-DA) settings menu on Nissan Sentra
For vehicles with the 7 inch meter display

Follow the steps below to enable or disable the I-DA system on the Nissan Sentra:

1. Press the button until “Settings” appears in the vehicle information display.

Use the button to select “Driver Assistance,” then press the OK button.

2. Select “Driver Attention Alert” and press the OK button to turn the system ON or OFF.

NOTE:

The selected setting will be retained even after the engine is restarted.

Intelligent Driver Alertness (I-DA) display on Nissan Sentra 4.2 inch meter display
For vehicles with the 4.2 inch meter display

Intelligent Driver Alertness (I-DA) system limitations

WARNING

The following list describes limitations of the Intelligent Driver Alertness system. Failure to operate the Nissan Sentra in accordance with these limitations may result in serious injury or death.

Intelligent Driver Alertness (I-DA) system warning message on Nissan Sentra

System malfunction

If the Intelligent Driver Alertness system on the Nissan Sentra malfunctions, a warning message will appear in the vehicle information display and the system will automatically stop operating.

Action to take

Stop the vehicle in a safe location, shift the Nissan Sentra into the P (Park) position, turn the engine off, and then restart the engine. If the system warning message continues to appear after restarting, have the system inspected. It is recommended that you visit an authorized NISSAN dealer for this service.

Break-in schedule

CAUTION

During the first 1,200 miles (2,000 km) of operation, follow the recommendations below to help achieve optimal engine performance and to ensure long-term reliability, durability, and fuel economy of your Nissan Sentra. Failure to follow these break-in guidelines may lead to reduced engine performance and shortened engine life.

System malfunction
If the Intelligent Forward Collision Warning (I-FCW) system on the Nissan Sentra malfunctions, the system will automatically deactivate. A warning chime will sound, the Automatic Emergency Bra ...

Fuel efficient driving tips
Follow these practical Fuel Efficient Driving Tips to help maximize fuel economy and overall efficiency of your Nissan Sentra in everyday driving conditions. 1. Use Smooth Accelerator and Brake Ped ...

Other materials:

Filament
Inspection and Repair Inspection When measuring voltage, wrap tin foil around the top of the negative probe. Then press the foil against the wire with your finger. Attach probe circuit tester (in Volt range) to middle portion of each filament. If a filament is burned out ...

P0507 Isc System
Dtc Description DTC Description The ECM controls the engine idle speed to a specified level through the fine adjustment of the air, which is let into the intake manifold, by operating the electric throttle control actuator. The operating of the throttle valve is varied to allow for ...

Removal and Installation
Removal and Installation REMOVAL Discharge the refrigerant. Refer to Recycle Refrigerant. Remove the front bumper. Refer to Removal and Installation. Remove air guides. Refer to Exploded View. Remove bolt (A) and disconnect high-pressure flexible hose from conden ...

© 2014-2026 Copyright www.nisentra.com