Nissan Sentra B18 (2020-2025) Service Manual: Inspection and Adjustment
INSPECTION AFTER REMOVAL
Check clutch pedal for bend, damage, or a cracked weld. If bend, damage, or a cracked weld is found, replace clutch pedal.
Check pedal pad. If wear or damage is found, replace pedal pad.
INSPECTION AFTER INSTALLATION
-
Check the height of clutch pedal. Refer to Inspection and Adjustment.
Removal and Installation
Removal and Installation
REMOVAL
If
necessary, remove instrument lower panel LH. Refer to Removal and Installation.
Using a
suitable tool, release clutch master cylinder rod end (A) f ...
Other materials:
Dtc Confirmation Procedure
DTC Confirmation
Procedure
TIRE PRESSURE SENSOR ID REGISTRATION
Perform tire pressure sensor ID registration. Refer
to Work Procedure.
>>
GO TO 2.
PERFORM DTC CONFIRMATION
...
Precautions
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along wit ...
Three Way Catalyst
If a large amount of unburned fuel flows into the catalyst, the catalyst
temperature will be excessively high. To
prevent this, follow the instructions.
Use unleaded gasoline only. Leaded gasoline will seriously damage the
three way catalyst.
When checking for ignition spark or measuring ...
