Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual / Body Interior / Seat :: Symptom Diagnosis / High Mode of Heated Seat Does Not Operate. Diagnosis Procedure

Nissan Sentra B18 (2020-2025) Service Manual: High Mode of Heated Seat Does Not Operate. Diagnosis Procedure

Diagnosis Procedure

Diagnosis Procedure
  1. CHECK HEATED SEAT RELAY

    1. Check heated seat relay.

      Refer to Component Function Check (LH) or Component Function Check (RH).

    Is the inspection result normal?

    YES>>

    GO TO 2.

    NO>>

    Repair or replace the malfunctioning parts.

  2. CHECK CUSHION HEATER

    1. Check cushion heater.

      Refer to Component Function Check (LH) or Component Function Check (RH).

    Is the inspection result normal?

    YES >>

    GO TO 3.

    NO >>

    Repair or replace the malfunctioning parts.

  3. REPLACE A/C AUTO AMP. OR A/C AMP.

    1. Replace A/C auto amp. (with auto A/C) or A/C amp. (with manual A/C). Refer to Removal and Installation (with auto A/C) or Removal and Installation (with manual A/C).

    Is the inspection result normal?

    YES >>

    Inspection End.

    NO >>

    Check intermittent incident. Refer to Intermittent Incident.

    Other materials:

    RAB system limitations
    WARNING The following list outlines the operational limitations of the Rear Automatic Braking (RAB) system. Failure to comply with these warnings and usage instructions may result in serious injury or death. When the Nissan Sentra approaches an obstacle while the accelerator or brake ped ...

    CVT Fluid filter
    Exploded View Transaxle assembly CVT fluid filter Fluid filter cover CVT fluid Removal and Installation REMOVAL Remove neighboring parts of CVT fluid filter. Remove fluid filter cover mounting bolt (A). Remove fluid filter cover (1) from transaxle by rotating leftw ...

    Intellignet Key Battery. Component Inspection
    Component Inspection Component Inspection CHECK INTELLIGENT KEY BATTERY Check by connecting a resistance (approximately 300 Ω) so that the current value becomes about 10 mA. Refer to Removal and Installation. ...