Exploded View
|
1. |
Center ventilator grille |
2. |
Hazard switch |
|
Pawl |
Removal and Installation
REMOVAL
Remove center ventilator grille. Refer to Removal and Installation.
Release
pawls and remove hazard switch (2) from center ventilator grille
(1).
|
|
: Pawl |
INSTALLATION
Installation is in the reverse order of removal.
Combination Switch
Optical SensorConfirmation Procedure
Confirmation
Procedure
PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Select “Self Diagnostic Result” mode of “BCM”.
...
Power Supply and Ground Circuit
Diagnosis Procedure
Diagnosis Procedure
CHECK FUSE
Check that the following fuse is not
blown:
Signal
name
Fuse
...
Perform Oil Return Operation
Perform Oil Return Operation
CAUTION:
If a large amount of refrigerant or oil leakage
is detected, do not perform oil return operation.
Start the
engine and set to the following conditions:
Engine speed: Idling to 1,200 rpm
A/C switch: ON
...