Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Electrical Load Signal

Nissan Sentra B18 (2020-2025) Service Manual / Engine / Work Procedure (After Replacing Electric Throttle Control Actuator) / Component Parts /circuit Diagnosis / Electrical Load Signal

Component Function Check

Component Function Check

  1. CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION

    With CONSULT

    1. Turn ignition switch ON.

    2. Select “DATA MONITOR” of “ENGINE” with CONSULT.

    3. Select “LOAD SIGNAL” and check indication under the following conditions.

      Monitor item

      Condition

      Indication

      LOAD SIGNAL

      Rear window defogger switch

      ON

      ON

      OFF

      OFF

    Is the inspection result normal?

    YES >>

    GO TO 2.

    NO >>

    Refer to Diagnosis Procedure.

  2. CHECK LIGHTING SWITCH FUNCTION

    With CONSULT

    Check “LOAD SIGNAL” indication under the following conditions.

    Monitor item

    Condition

    Indication

    LOAD SIGNAL

    Lighting switch

    ON at 2nd position

    ON

    OFF

    OFF

    Is the inspection result normal?

    YES >>

    GO TO 3.

    NO >>

    Refer to Diagnosis Procedure.

  3. CHECK HEATER FAN CONTROL SWITCH FUNCTION

    With CONSULT

    Select “HEATER FAN SW” and check indication under the following conditions.

    Monitor item

    Condition

    Indication

    HEATER FAN SW

    Heater fan control switch

    ON

    ON

    OFF

    OFF

    Is the inspection result normal?

    YES >>

    INSPECTION END

    NO >>

    Refer to Diagnosis Procedure.

Diagnosis Procedure

Diagnosis Procedure

The electrical load signal (Headlamp switch signal, rear window defogger switch signal, etc.) is transferred from BCM via the CAN communication through IPDM E/R to ECM.

  1. INSPECTION START

    Confirm the malfunctioning circuit (rear window defogger, headlamp or heater fan). Refer to Component Function Check.

    Which circuit is related to the incident?

    Rear window defogger>>

    GO TO 2.

    Headlamp>>

    GO TO 3.

    Heater fan>>

    GO TO 4.

  2. CHECK REAR WINDOW DEFOGGER SYSTEM

    Check rear window defogger system. Refer to Work Flow.

    >>

    INSPECTION END

  3. CHECK HEADLAMP SYSTEM

    Check headlamp system. Refer to Work Flow(Halogen headlamp), Work Flow(Led headlamp).

    >>

    INSPECTION END

  4. CHECK HEATER FAN CONTROL SYSTEM

    Check heater fan control system. Refer to Work Flow.

    >>

    INSPECTION END

Egr Volume Control Valve
Component Inspection Component Inspection CHECK EGR VOLUME CONTROL VALVE-1 With CONSULT Turn ignition switch ON (engine stopped). ...

Engine Coolant Temperature Sensor
Component Inspection Component Inspection CHECK ENGINE COOLANT TEMPERATURE SENSOR Turn ignition switch OFF. Disconnect en ...

Other materials:

Diagnosis and repair workflow
Work flow Overall sequence Detailed flow 1. Obtain information about symptom Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred. >> GO TO 2. 2. Confirm concern Check the malfunction on the veh ...

P34af Electric Intake Valve Timing Control Position Sensor
Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection conditi ...

Diagnosis System (ipdm E/r)
Consult Function (ipdm E/r) CONSULT Function (IPDM E/R) IPDM E/R Refer to CONSULT Function (IPDM E/R). ...

© 2014-2026 Copyright www.nisentra.com