Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE AGAIN
-
CONSULT-
Ignition switch ON.
-
Erase DTC.
-
Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure.
-
Is DTC U2152–87 detected?
YES>>Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.
NO>>Inspection End.
-
Confirmation Procedure
Confirmation Procedure
DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Igni ...
Other materials:
Door Mirror Assembly
Removal and Installation
Removal and Installation
REMOVAL
CAUTION:
Be careful not to scratch or damage the door
mirror body when removing.
Remove
front door finisher. Refer to Removal and Installation.
Using a
suitable tool, release clips and remove door mirr ...
Ipdm-e branch line circuit
Diagnosis Procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the terminals and connectors of the ipdm e/r for damage, bend and
loose connection (unit side
and connector side).
Is the inspection result normal?
Yes ...
Power supply and ground circuit
Diagnosis procedure
Regarding wiring diagram information, refer to bcs-51, "wiring diagram".
1.Check fuses and fusible link
Check that the following fuses and fusible link are not blown.
Is the fuse blown?
YES >> Replace the blown fuse or fusible link after repairing the aff ...
