Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure

DTC Diagnosis Procedure

  1. CHECK CAN COMMUNICATION

    1. Check CAN communication. Refer to Trouble Diagnosis Flow Chart.

    Is DTC “U2118–87” detected?

    YES >>

    Repair or replace the malfunctioning part.

    NO >>

    Inspection End.

Dtc Confirmation Procedure
DTC Confirmation Procedure DTC CONFIRMATION CONSULT Ignition switch ON and wait for 2 seconds or ...

U2140-87 Can Comm Err (ecm)
...

Other materials:

EPS Warning lamp
Component Function Check 1.CHECK THE ILLUMINATION OF THE EPS WARNING LAMP Check that the EPS warning lamp turns ON when ignition switch turns ON. Then, EPS warning lamp turns OFF after the engine is started. Is the inspection result normal? YES >> Inspection End. NO >> Perfo ...

Headlamp (hi) circuit
Description The IPDM E/R (intelligent power distribution module engine room) controls the headlamp high relay based on inputs from the BCM over the CAN communication lines. When the headlamp high relay is energized, power flows through fuses 41 and 42, located in the IPDM E/R. Power then flo ...

Transaxle Side
Removal and Installation Removal and Installation REMOVAL Remove front drive shaft. Refer to Removal and Installation (LH) or Removal and Installation (RH). Secure front drive shaft in a vise. CAUTION: When securing shaft in a vise, always use copper or aluminum ...

© 2014-2026 Copyright www.nisentra.com