CHECK FUSE
Ignition switch OFF.
Check that the following fuse is not blown (open):
|
Signal name |
Fuse No. |
Capacity |
|---|---|---|
|
Ignition switch ON power supply |
6 |
10 A |
Is the inspection result normal?
YES >>GO TO 2
NO >>Replace the blown fuse after repairing the affected circuit.
CHECK HEATED SEAT LH LOW RELAY POWER SUPPLY
Disconnect heated seat LH low relay connector.
Ignition switch ON.
Check voltage between heated seat LH low relay harness connector and ground.
|
(+) |
(-) |
Voltage (Approx.) |
|
|---|---|---|---|
|
Heated seat LH low relay |
|||
|
Connector |
Terminal |
||
|
M6 |
1 |
Ground |
Battery voltage |
Is the inspection result normal?
YES >>GO TO 3.
NO >>Repair or replace harness.
CHECK HEATED SEAT LH LOW RELAY
Check heated seat LH low relay.
Refer to Component Inspection.
Is the inspection result normal?
YES >>GO TO 4.
NO >>Replace heated seat LH low relay.
CHECK HEATED SEAT LH LOW RELAY CONTROL SIGNAL
Connect heated seat LH low relay connector.
Check voltage between A/C auto amp. (with auto A/C) or A/C amp. (with manual A/C) harness connector and ground.
|
(+) |
(–) |
Condition |
Voltage (Approx.) |
||
|---|---|---|---|---|---|
|
A/C auto amp. |
|||||
|
Connector |
Terminal |
||||
|
M34 |
75 |
Ground |
Heated seat switch LH (LOW) |
OFF |
Battery voltage |
|
ON |
0 V |
||||
|
(+) |
(–) |
Condition |
Voltage (Approx.) |
||
|---|---|---|---|---|---|
|
A/C amp. |
|||||
|
Connector |
Terminal |
||||
|
M82 |
75 |
Ground |
Heated seat switch LH (LOW) |
OFF |
Battery voltage |
|
ON |
0 V |
||||
Is the inspection result normal?
YES >>Replace A/C auto amp. (with auto A/C) or A/C amp. (with manual A/C). Refer to Removal and Installation (with auto A/C) or Removal and Installation (with manual A/C).
NO >>GO TO 5.
CHECK HEATED SEAT LH LOW RELAY CONTROL SIGNAL CIRCUIT
Ignition switch OFF.
Disconnect A/C auto amp. connector (with auto A/C) or A/C. amp. connector (with manual A/C) and heated seat LH low relay connector.
Check continuity between A/C auto amp. harness connector (with auto A/C) or A/C. amp. harness connector (with manual A/C) and heated seat LH low relay harness connector.
|
A/C auto amp. |
Heated seat LH low relay |
Continuity |
||
|---|---|---|---|---|
|
Connector |
Terminal |
Connector |
Terminal |
|
|
M34 |
75 |
M6 |
2 |
Yes |
|
A/C amp. |
Heated seat LH low relay |
Continuity |
||
|---|---|---|---|---|
|
Connector |
Terminal |
Connector |
Terminal |
|
|
M82 |
75 |
M6 |
2 |
Yes |
Check continuity between A/C auto amp. harness connector (with auto A/C) or A/C amp. harness connector (with manual A/C) and ground.
|
A/C auto amp. |
(–) |
Continuity |
|
|---|---|---|---|
|
Connector |
Terminal |
||
|
M34 |
75 |
Ground |
No |
|
A/C amp. |
(–) |
Continuity |
|
|---|---|---|---|
|
Connector |
Terminal |
||
|
M82 |
75 |
Ground |
No |
Is the inspection result normal?
YES >>GO TO 6.
NO >>Repair or replace harness.
CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to Intermittent Incident.
Inspection End.
Dtc Confirmation ProcedureAir fresheners
Most air fresheners use a solvent that could affect
the vehicle interior. If you use an air freshener,
take the following precautions:
Hanging-type air fresheners can cause permanent
discoloration when they contact vehicle
interior surfaces. Place the air freshener
in a location that all ...
G Sensor
Exploded View
G sensor
Bracket
Vehicle front
NВ·m (kg-m, ft-lb)
NВ·m (kg-m, in-lb)
Removal and Installation
WARNING:
Do not leave any objects (screwdrivers, tools, etc.) on the seat during
seat repair. It can lead to personal
injury if the side air bag module should acc ...
P0090 Fuel Rail Pressure Control System
Dtc Description
DTC Description
DTC DETECTION LOGIC
Note:
DTC P0090 may be displayed when running out of gas.
DTC
CONSULT screen terms
(Trouble diagnosis
content)
...