Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure
The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
-
Activate and display TPMS sensor IDs
-
Display tire pressure reported by the TPMS sensor
-
Read TPMS DTCs
-
Register TPMS sensor IDs
-
PERFORM SELF DIAGNOSTIC RESULT
-
CONSULTReplace rear left tire pressure sensor even if other DTCs are displayed along with “C1733-16” in "Self Diagnostic Result" mode of “BCM(AIR PRESSURE MONITOR)”.
Replace rear left tire pressure sensor. Refer to Removal and Installation.
-
Dtc Confirmation Procedure
DTC Confirmation
Procedure
PERFORM DTC CONFIRMATION
CONSULT
Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or mor ...
Other materials:
How to use the remote keyless entry function
The remote keyless entry function on the Nissan Sentra allows you to control
all door locks using the Intelligent Key. This convenient system enables locking
and unlocking of the doors from a distance of up to approximately 33 ft (10 m) away
from the vehicle, depending on surrounding condition ...
Special Service Tool
Special Service Tool
The actual shape of the tools may differ from
those illustrated here.
Tool number
(TechMate No.)
Tool name
Description
...
Air cleaner
The viscous paper-type air cleaner filter element used in the Nissan Sentra is
designed for single use only and must not be cleaned or reused. The filter should
be replaced according to the maintenance intervals listed in the "Maintenance and
schedules" section of this manual to ...
