S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information

Nissan Sentra B18 (2020-2025) Service Manual: C1733-16 Tire Pressure Sensor Rl

Dtc Description

DTC Description

Note:

The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.

  • Activate and display TPMS sensor IDs

  • Display tire pressure reported by the TPMS sensor

  • Read TPMS DTCs

  • Register TPMS sensor IDs

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

C1733-16

Tire pressure sensor RL

(Tire pressure sensor rear left)

Diagnosis condition

Drive at a speed of 25 MPH (40 km/h) or more reaches 10 minutes in total.

Signal (terminal)

Tire pressure sensor signal.

Threshold

Rear left tire pressure sensor battery voltage is low.

Diagnosis delay time

2 second or more.

POSSIBLE CAUSE

Rear left tire pressure sensor

FAIL-SAFE

—

Dtc Confirmation Procedure

DTC Confirmation Procedure

  1. PERFORM DTC CONFIRMATION

    1. CONSULT

      1. Drive the Nissan Sentra vehicle at 25 MPH (40 km/h) or more reaches 10 minuets in total.

        Note:

        Avoid driving in areas with radio interference.

      2. Stop the Nissan Sentra vehicle.

      3. Select “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)”.

    Is DTC “C1733-16” detected?

    YES>>

    Refer to DTC Diagnosis Procedure.

    NO>>

    To check malfunction symptom before repair: Refer to Intermittent Incident.

    NO>>

    Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

Note:

The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.

  • Activate and display TPMS sensor IDs

  • Display tire pressure reported by the TPMS sensor

  • Read TPMS DTCs

  • Register TPMS sensor IDs

  1. PERFORM SELF DIAGNOSTIC RESULT

    1. CONSULT

      Replace rear left tire pressure sensor even if other DTCs are displayed along with “C1733-16” in "Self Diagnostic Result" mode of “BCM(AIR PRESSURE MONITOR)”.

    >>

    Replace rear left tire pressure sensor. Refer to Removal and Installation.

    C1732-68 Tire Pressure Sensor Fr
    Dtc Description DTC Description Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additio...
    C1733-68 Tire Pressure Sensor Rl
    Dtc Description DTC Description Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additio...

    Other materials:

    B1360 Combination Meter
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...

    Bluetooth connections screen
    " " (back) key Bluetooth tab Connections screen "Add New" key " " (settings) key " " (info) key " " (Bluetooth Audio connection) key " " (Bluetooth Hands-Free Phone System connection) key U ...

    Body Welding and Precautions
    Outline of Welding Features of Welding Features of Welding No restrictions on the shape of joint Reduction in weight compared to using of bolts or rivets Great strength Airtight and watertight High working ef ...