Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Suspension / Road Wheels & Tires :: Dtc/circuit Diagnosis / C1713-7b Low Tire Pressure Rl / Dtc Diagnosis Procedure

DTC Diagnosis Procedure Note:

The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.

  1. TIRE PRESSURE SENSOR ID REGISTRATION

    1. Perform tire pressure sensor ID registration. Refer to Work Procedure.

    Is tire pressure sensor ID registration completed?

    YES >>

    GO TO 2.

    NO >>

    Replace rear left tire pressure sensor. Refer to Removal and Installation.

  2. CHECK TIRE PRESSURE

    1. Check the tire pressure of all wheels. Refer to Tire Air Pressure.

    Is the inspection result normal?

    YES >>

    Perform “DTC Confirmation Procedure” (Self Diagnostic Result) again. Refer to DTC Confirmation Procedure.

    NO >>

    GO TO 3.

  3. CHECK TIRE PRESSURE SIGNAL

    1. CONSULT

      1. Adjust tire pressure for all wheels to the specified value. Refer to Tire Air Pressure.

        Note:

        If the checked value is close to the standard, reduce the tire pressure, and then with the ignition switch ON, adjust the tire pressure again so that it is within the standard.

      2. Select "AIR PRESS RL" in "Data Monitor" mode of "BCM(AIR PRESSURE MONITOR)".

      3. Check that the rear left tire pressures match the standard value. Refer to Values on the Diagnosis Tool.

    Is the inspection result normal?

    YES >>

    After erasing DTC record, Inspection End.

    NO >>

    Replace rear left tire pressure sensor. Refer to Removal and Installation.

Dtc Confirmation Procedure
DTC Confirmation Procedure PERFORM DTC CONFIRMATION CONSULT Ignition switch ON. CAUTION: ...

C1714-7a Low Tire Pressure Rr
...

Other materials:

Tilt operation
Pull the lock lever down 1 and adjust the steering wheel up or down 2 to the desired position. Push the lock lever up 1 firmly to lock the steering wheel in place. WARNINGDo not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accide ...

Parking Brake System
Inspection Inspection INSPECTION Lever Stroke Operate the parking brake lever with a force of 196 N (20.0 kg-f, 44.1 lb-f). Check that the lever stroke is within the specified number of notches. (Check it by listening to the clicks of the ratchet.) ...

Seats
This section describes the seat design and adjustment features of the Nissan Sentra, helping drivers and passengers achieve a safe, comfortable, and ergonomically correct seating position. WARNING Do not ride in a moving Nissan Sentra when the seatback is reclined. This is extremely ...

© 2014-2026 Copyright www.nisentra.com