Dtc Diagnosis Procedure
Dtc DescriptionTrouble diagnosis - specification
value
Description
The specification (SP) value indicates the tolerance of the value that is
displayed in “SPEC” of “DATA MONITOR”
mode of CONSULT during normal operation of the Engine Control System. When the
value in “SPEC” of
“DATA MONITOR” mode is within t ...
Low tire pressure warning lamp
Component Function Check
1.CHECK THE ILLUMINATION OF THE LOW TIRE PRESSURE WARNING LAMP
Check that the low tire pressure warning lamp is turned OFF after
illuminating for approximately 1 second,
when the ignition switch is turned ON.
Is the inspection result normal?
YES >> Inspection ...
Evap Canister
Evap Canister : Periodic Maintenance
EVAP CANISTER : Periodic Maintenance
CAUTION:
Do not use compressed air or a high pressure
pump.
Do not exceed 4.12 kPa (0.042 kg/cm2,
0.6 psi) of pressure in EVAP system.
N ...