Nissan Sentra B18 (2020-2025) Service Manual: Dtc Diagnosis Procedure
The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
-
Activate and display TPMS sensor IDs
-
Display tire pressure reported by the TPMS sensor
-
Read TPMS DTCs
-
Register TPMS sensor IDs
-
BCM CONFIGURATION
-
Perform BCM configuration. Refer to Work Procedure.
GO TO 2.
-
-
TIRE PRESSURE SENSOR ID REGISTRATION
-
Perform tire pressure sensor ID registration. Refer to Work Procedure.
Does low tire pressure warning lamp turn OFF?
YES >>Inspection End.
NO >>Replace BCM. Refer to Removal and Installation.
-
Dtc Confirmation Procedure
DTC Confirmation
Procedure
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Select “Self Diagnostic Result” mode of “BCM(AIR
PRESSURE MONI ...
Other materials:
P28ed-00 Electric Oil Pump
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported ...
Component Function Check
Component Function
Check
CHECK HEATED SEAT RH RELAY FUNCTION
Check that seat cushion and seat back warm to the
preset temperature when operating the heated seat switch RH to HIGH
and LOW.
Is the inspection resu ...
