The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information.
Activate and display TPMS sensor IDs
Display tire pressure reported by the TPMS sensor
Read TPMS DTCs
Register TPMS sensor IDs
PERFORM SELF DIAGNOSTIC RESULT
CONSULT
Replace front left tire pressure sensor even if other DTCs are displayed along with “C1731-68” in "Self Diagnostic Result" mode of “BCM(AIR PRESSURE MONITOR)”.
Replace front left tire pressure sensor. Refer to Removal and Installation.
Dtc Confirmation ProcedureAv Control Unit
List of Ecu Reference
List of ECU Reference
ECU
Reference
AV control unit
Values on the Diagnosis Tool
...
Dtc Confirmation Procedure
DTC Confirmation Procedure
DTC CONFIRMATION PROCEDURE
CONSULT
Ignition switch ON.
Ignition switch OFF and wait at least 30
seconds.
...
Special Service Tools
Special Service Tools
The actual shape of the tools may differ from those
illustrated here.
Tool number
(TechMate No.)
Tool name
Description
...