Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
PERFORM SELF DIAGNOSTIC RESULT
-
CONSULTSelect “Self Diagnostic Result” mode of “BCM(AIR PRESSURE MONITOR)”.
Is DTC “C1700-54” detected?
YES >>Refer to DTC Diagnosis Procedure.
NO >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional information.
...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions: Refer to the Signal Tech II User
Guide for additional informatio ...
Other materials:
U0140 Lost communication (BCM)
DTC Logic
DTC DETECTION LOGIC
DTC
CONSULT screen terms
[Trouble diagnosis content]
DTC detection condition
Possible causes
U0140
LOST COMM (BCM)
[Lost Communication With
Body Control Module]
When the ignition switch is ON, TCM is unable
to receive the CAN ...
P0088 Frp Control System
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Engine Can Not Start
Diagnosis Procedure
Diagnosis Procedure
DESCRIPTION
Engine does not start when push-button ignition
switch is pressed.
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE
THE SAME SYMPTOMS)
Door lock operation (rem ...
