Nissan Sentra B18 (2020-2025) Service Manual: Dtc Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|---|---|---|---|
|
C1623-87 |
ECM system (Engine control module system) |
Diagnosis condition |
When ignition switch is ON. |
|
Signal (terminal) |
CAN communication signal |
||
|
Threshold |
When a malfunction is detected in ECM. |
||
|
Diagnosis delay time |
2 seconds or more |
||
POSSIBLE CAUSE
-
CAN communication line
-
ECM
-
EPS control unit
FAIL-SAFE
Normal control
Confirmation Procedure
Confirmation Procedure
PRECONDITIONING
If “Confirmation Procedure” has been
previously conducted, always place the ignition switch OFF and wait
...
Other materials:
Diagnosis system (bcm) (with intelligent key system)
Common item
Common item : consult function (bcm - common item)
Application item
Consult performs the following functions via can communication with bcm.
Direct diagnostic mode
Description
ECU identification
The BCM part number is displayed.
Self diagnostic result
...
Multi Remote Ent
Consult Function (bcm - Multi Remote Ent)
CONSULT Function
(BCM - MULTI REMOTE ENT)
DATA MONITOR
Note:
The following table includes information (items)
inapplicable to this Nissan Sentra vehicle. For information (items) applicable to
this vehicle, refer to CONSULT display items ...
NISSAN vehicle immobilizer system
The NISSAN Vehicle Immobilizer system will not
allow the engine to start without the use of the
registered key.
If the engine fails to start using a registered key
(for example, when interference is caused by
another registered key, an automated toll road
device or automatic payment device o ...
