Nissan Sentra B18 (2020-2025) Service Manual: Dtc Confirmation Procedure
-
DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON.
-
Ignition switch OFF and wait at least 30 seconds.
-
Ignition switch ON and wait at least 2 seconds or more.
-
Select “Self Diagnostic Result” mode of “SONAR”.
-
Is DTC B2722 detected?
YES >>Refer to DTC Diagnosis Procedure.
NO >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>Confirmation after repair: Inspection End.
-
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnos ...
Dtc Diagnosis Procedure
DTC Diagnosis
Procedure
DETERMINE MALFUNCTION TYPE
CONSULT
Ignition switch ON.
...
Other materials:
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT
PRE-TENSIONER"
The supplemental restraint system such as “air bag” and “seat belt pre-tensioner”,
used along
with a front seat belt, helps to reduce the risk or severity of injur ...
Diagnosis System (av Control Unit)
Description
Description
The AV control unit on board diagnosis performs
the functions listed in the table below:
Mode
Description
Self Diagnosis
...
System temporarily unavailable
The following conditions may cause the Intelligent Cruise Control (ICC) system
in the Nissan Sentra to become temporarily unavailable.
In these situations, the ICC system may not cancel automatically and may be unable
to maintain the selected following distance from the vehicle ahead.
Cond ...
