CHECK FRONT WIPER MOTOR GROUND CIRCUIT
Ignition switch OFF.
Disconnect front wiper motor connector.
Check continuity between front wiper motor harness connector and ground.
|
Front wiper motor |
(–) |
Continuity |
|
|---|---|---|---|
|
Connector |
Terminal |
||
|
E1 |
2 |
Ground |
Yes |
Is the inspection result normal?
YES >>Inspection End.
NO >>Repair or replace harness.
Consult function
FUNCTION
Diagnostic test mode
Function
Self Diagnostic Results
Self-diagnostic results such as 1st trip DTC, DTCs and 1st trip
freeze frame data or freeze frame data
can be read and erased quickly.*
Data Monitor
Input/Output data in the ECM can be read.
...
General Specifications
General Specifications
Unit: mm (in)
Master cylinder
Cylinder bore diameter
25.4 (1)
Brake booster
Diaphragm
...
Removal and Installation - Drum Brake
Removal and Installation - Drum Brake
REMOVAL
Remove rear
hub assembly. Refer to Removal and Installation.
Place a
suitable jack under the outer end of the rear lower link to relieve
the coil spring tension.
Warning:
Place a suitable jack under the outer end of
...