Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock :: Dtc/circuit Diagnosis / B2046-55 Eeprom / Confirmation Procedure

Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Erase DTC.
  2. Ignition switch OFF.
  3. Ignition switch ON.
  4. Select “Self Diagnostic Result” mode of “HANDS FREE MODULE”.
Is DTC detected?
YES >>
Refer to DTC Diagnosis Procedure.
NO >>
To check malfunction symptom before repair. Refer to Intermittent Incident.
NO >>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis ...

Dtc Diagnosis Procedure

DTC Diagnosis Procedure INTELLIGENT KEY UNIT CONFIGURATION Perform configuration. Refer to Work Procedure. Is the DTC detected? ...

Other materials:

Malfunction indicator lamp
Component Function Check 1.CHECK MIL FUNCTION Turn ignition switch ON. Check that MIL lights up. Is the inspection result normal? YES >> INSPECTION END NO >> Proceed to EC-467, "Diagnosis Procedure". Diagnosis Procedure 1.CHECK DTC WITH ECM Check that DTC UXXXX i ...

Dtc Diagnosis Procedure
DTC Diagnosis Procedure PERFORM SELF DIAGNOSTIC RESULT CONSULT Ignition switch ON. Select "Self Diagnostic Result" mode of “BCM”. ...

Predictive Course Line Center Position Adjustment
Description Description Adjust the center position of the predictive course line of the rear view monitor if it is shifted. Work Procedure Work Procedure DRIVING Drive the vehicle straight ahead 100 m (328.1 ft) or more at a speed of ...