Nissan Sentra B18 (2020-2025) Service Manual: Confirmation Procedure

Nissan Sentra B18 (2020-2025) Service Manual / Body Exterior, Doors, Roof & Vehicle Security / Door & Lock :: Dtc/circuit Diagnosis / B2001-45 Intelligent Key Unit / Confirmation Procedure

Confirmation Procedure

PERFORM DTC CONFIRMATION PROCEDURE
1. CONSULT
  1. Erase DTC.
  2. Ignition switch OFF.
  3. Ignition switch ON.
  4. Select “Self Diagnostic Result” mode of “HANDS FREE MODULE".
Is DTC detected?
YES>>
Refer to DTC Diagnosis Procedure.
NO>>
To check malfunction symptom before repair. Refer to Intermittent Incident.
NO>>
Confirmation after repair: Inspection End.

Dtc Description

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen items (Trouble diagnosis ...

Dtc Diagnosis Procedure

DTC Diagnosis Procedure REPLACE INTELLIGENT KEY UNIT When DTC “B2001–45” is detected, replace Intelligent Key unit. ...

Other materials:

Precautions for Work
Precautions for Work When removing or disassembling each component, be careful not to damage or deform it. If a component may be subject to interference, be sure to protect it with a shop cloth. When removing (disengaging) components with a screw ...

Parking Brake Rear Cable
Removal and Installation Removal and Installation REMOVAL Remove the cup holder finisher. Refer to Exploded View. Loosen the adjusting nut (A). CAUTION: Do not reuse the adjusting nut if the nut is removed. Note: It is not necessary to remove the fro ...

Removal and Installation
Removal and Installation REMOVAL For M/T models, drain the M/T oil. Refer to Draining. Remove disc brake rotor. Refer to Removal and Installation. CAUTION: Do not depress the brake pedal while the brake caliper is removed. Remove the wheel sensor bolt. Posi ...