Nissan Sentra B18 (2020-2025) Service Manual: Component Function Check

Nissan Sentra B18 (2020-2025) Service Manual / Driver Controls / Defogger :: Dtc/circuit Diagnosis / Door Mirror Lh Defogger / Component Function Check

Component Function Check

CHECK DOOR MIRROR LH DEFOGGER FUNCTION
1. CONSULT
  1. Ignition switch ON.
  2. Select “REAR DEFOGGER” in “Active Test” mode of "BCM(REAR DEFOGGER)".
  3. Select “On”.
  4. Check that the door mirror LH glass is getting warmer.
    Note:
    When glass is hot, never start inspection until it is cool enough.
Is the inspection result normal?
YES>>
Inspection End.
NO>>
Refer to Diagnosis Procedure.

Diagnosis Procedure

Diagnosis Procedure CHECK DOOR MIRROR LH POWER SUPPLY CIRCUIT Ignition switch OFF. D ...

Other materials:

On Board Diagnostic (obd) System
Description Description This system is an on board diagnostic system that records exhaust emission-related diagnostic information and detects a sensors/actuator-related malfunction. A malfunction is indicated by the malfunction indicator lamp (MIL) and stored in ECU memory as a DTC. ...

U0079 Control Module Communication Bus G Off
Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition ...

Diagnosis Procedure
Diagnosis Procedure Note: The Signal Tech II Tool [– (NI-50190)] can be used to perform the following functions: Refer to the Signal Tech II User Guide for additional information. Activate and display TPMS sensor IDs Display tire pressure reported by the ...