Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: U0079 Control Module Communication Bus G Off

Dtc Description

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

U0079–00

Control module communication Bus G Off

(Control module communication Bus G Off)

[—]

Diagnosis condition

When ignition switch is ON.

Signal (terminal)

CAN communication signal

Threshold

Transmit or receive is abnormal

Diagnosis delay time

2 seconds or more

POSSIBLE CAUSE

CAN communication system

FAIL-SAFE

CAN communication does not function.

Confirmation Procedure

Confirmation Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE

    1. CONSULT

      1. Ignition switch ON.

      2. Ignition switch OFF and wait at least 30 seconds.

      3. Ignition switch ON and wait at least 30 seconds or more.

      4. Select “Self Diagnostic Result” mode of “MULTI AV”.

      5. Check DTC.

    Is DTC U0079–00 detected?

    YES >>

    Proceed to DTC Diagnosis Procedure.

    NO >>

    To check malfunction symptom before repair: Refer to Intermittent Incident.

    NO >>

    Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

  1. PERFORM DTC CONFIRMATION PROCEDURE AGAIN

    1. CONSULT

      1. Ignition switch ON.

      2. Erase DTC.

      3. Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure.

    Is DTC U0079–00 detected again?

    YES >>

    Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.

    NO >>

    Inspection End.

    B13cf Buttons
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detection condition B13CF-73 Buttons (AV control unit) Diagnosis...
    U1000 Can Comm Circuit
    Dtc Description DTC Description DESCRIPTION CAN (Controller Area Network) is a serial communication line for real-time application. It is an on-Nissan Sentra vehicle multiplex c...

    Other materials:

    Reverse Idler Shaft and Gear
    Exploded View Exploded View 1. Reverse output gear 2. Snap ring 3. R ...

    P1ae0-61 Range Misdisplay
    Dtc Description DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection conditi ...

    Steering Control System. Basic Inspection
    Diagnosis and Repair Work Flow Work Flow Work Flow DETAILED FLOW INTERVIEW FROM THE CUSTOMER Clarify customer complaints before inspection. First of all, perform an interview utilizing, refer to Diagnostic Work Sheet, and reproduce ...