Nissan Sentra B18 (2020-2025) Service Manual: Component Function Check
-
CHECK FUNCTION
-
CONSULT-
Select "Back door/trunk lid switch" in "Data Monitor" mode of "BCM(TRUNK)".
-
Check that the function operates normally according to the following conditions:
Monitor item
Condition
Status
Back door/trunk lid switch
Trunk lid
Open
On
Closed
Off
-
Is the inspection result normal?
YES >>Trunk room lamp switch is OK.
NO >>Refer to Diagnosis Procedure.
-
Diagnosis Procedure
Diagnosis Procedure
CHECK TRUNK ROOM LAMP SWITCH INPUT SIGNAL
Ignition switch OFF.
Check vol ...
Other materials:
Precaution for Supplemental Restraint System (srs) "air Bag" and "seat Belt Pre-Tensioner"
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as
“AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along with a front seat belt, helps to reduce the risk or
severity of injury to the driver and fron ...
Main line between ipdm-e and dlc
circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch off.
Disconnect the battery cable from the negative terminal.
Check the following terminals and connectors for damage, bend and loose
connection (connector side
and harness side).
Harness connector E4
Harness connec ...
Air Pressure Monitor
Consult Function (bcm - Air Pressure Monitor)
CONSULT Function
(BCM - AIR PRESSURE MONITOR)
Note:
The Signal Tech II Tool [– (NI-50190)] can be used
to perform the following functions. Refer to the Signal Tech II User
Guide for additional information.
Activate and ...
