Nissan Sentra B18 (2020-2025) Service Manual: C1f36-55 Configuration
Dtc Description
DTC Description
DTC DETECTION LOGIC
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|---|---|---|---|---|
|
C1F36 |
55 |
CONFIG UNFINISHED (Configuration unfinished) |
Diagnosis condition |
|
|
Signal (terminal) |
— |
|||
|
Threshold |
The Nissan Sentra vehicle specifications of ADAS control unit 2 is incomplete. |
|||
|
Diagnosis delay time |
1 second or less |
|||
POSSIBLE CAUSE
Nissan Sentra Vehicle specifications for ADAS control unit 2 is incomplete.
FAIL-SAFE
The following systems are canceled.
-
Nissan Sentra Vehicle-to-vehicle distance control mode
-
Conventional (fixed speed) cruise control mode
-
AEB
-
LDW
-
TSR
-
BSW
-
I-DA
-
RCTA
-
I-FCW
-
RAB
Confirmation Procedure
Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
Start the engine.
-
Turn the AEB system ON.
-
Perform “All DTC Reading” with CONSULT.
-
Check if the “C1F36-55” is detected as the current malfunction in “Self Diagnostic Result” of “ICC/ADAS 2”.
Is “C1F36-55” detected as the current malfunction?
YES >>DTC Diagnosis Procedure
NO-1 >>To check malfunction symptom before repair: Intermittent Incident
NO-2 >>Confirmation after repair: INSPECTION END
-
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
-
PERFORM CONFIGURATION OF ADAS CONTROL UNIT 2
Perform configuration of ADAS control unit 2 when DTC “C1F36-55” is detected.
>>Perform configuration of ADAS control unit 2. Work Procedure
Other materials:
U2141 Mac Comm Error (tcm)
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection condition
...
Security systems
Your Nissan Sentra may be equipped with two different types of security systems
designed to enhance vehicle protection and theft deterrence:
Vehicle security system (if so equipped)
NISSAN Vehicle Immobilizer System
Vehicle security system
The vehicle security system on the Nissan Se ...
Intelligent Key Unit. Removal and Installation
Removal and Installation
Removal and Installation
REMOVAL
CAUTION:
Be sure to perform “ADDITIONAL
SERVICE WHEN REPLACING INTELLIGENT KEY UNIT” when replacing
Intelligent Key unit. Refer to Work Procedure.
Remove
instrument panel assembly. Refer to Removal and ...