Nissan Sentra B18 (2020-2025) Service Manual: B2e05 Air Bag Can
Dtc Description
DTC Description
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|---|---|---|---|
|
B2E05-29 |
Air Bag CAN (Air Bag CAN) |
Diagnosis condition |
When ignition switch is ON |
|
Signal (terminal) |
CAN communication signal |
||
|
Threshold |
Transmission or reception error |
||
|
Diagnosis delay time |
2 seconds or more |
||
POSSIBLE CAUSE
CAN communication system
FAIL-SAFE
Telematics system does not operate
Confirmation Procedure
Confirmation Procedure
-
PERFORM DTC CONFIRMATION PROCEDURE
-
CONSULT-
Ignition switch ON.
-
Ignition switch OFF and wait at least 30 seconds.
-
Ignition switch ON and wait at least 30 seconds or more.
-
Select “Self Diagnostic Result” mode of “IVC”.
-
Check DTC.
-
Is DTC B2E05–29 detected?
YES>>Proceed to DTC Diagnosis Procedure.
NO>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO>>Confirmation after repair: Inspection End.
-
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
-
PERFORM CAN COMMUNICATION TROUBLE DIAGNOSIS
-
Perform the trouble diagnosis for CAN communication system. Refer to Trouble Diagnosis Flow Chart.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Repair or replace harness or connector.
-
-
CHECK THE AIR BAG DIAGNOSIS SENSOR UNIT
-
CONSULT-
Ignition switch ON.
-
Select “Self Diagnostic Result” mode of “AIR BAG”.
-
Check DTC.
-
Is any DTC detected?
YES >>Perform diagnosis on the detected DTC. Refer to DTC Index.
NO >>GO TO 3.
-
-
PERFORM CONFIRMATION PROCEDURE AGAIN
-
CONSULT-
Ignition switch ON.
-
Erase DTC.
-
Perform DTC confirmation procedure again. Refer to DTC Confirmation Procedure.
-
Is DTC B2E05–29 detected again?
YES >>Replace TCU. Refer to Removal and Installation.
NO >>Inspection End.
-
Other materials:
Steering Switches
Diagnosis Procedure
Diagnosis Procedure
CHECK STEERING WHEEL AUDIO CONTROL
SWITCH RESISTANCE
Ignition switch OFF.
Disconnect combination switch connector.
...
P1564 Ascd Steering Switch
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Glass & Window System. Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses
Squeak and Rattle Trouble Diagnoses
Work Flow
Work Flow
CUSTOMER INTERVIEW
Interview the customer if possible, to determine
the conditions that exist when the noise occurs. Use the Diagnostic
Worksheet during the interview to document the facts and conditions
when the noise occu ...