Nissan Sentra B18 (2020-2025) Service Manual: Antenna Amp
Removal and Installation
Removal
Remove passenger side rear pillar finisher. Refer to Removal and Installation — Rear Pillar Upper Finisher.
Remove
screw (A) from antenna amp (1). 
Disconnect the harness connector and remove the antenna amp.
Installation
Installation is in the reverse order of removal.
Other materials:
Inspection
Inspection
INSPECTION AFTER REMOVAL
Check the following items, and replace the parts
if necessary.
Transverse Link
Check the transverse link for deformation, cracks
or damage.
Check the bushing for complete separation. (If
completely separated, ...
Removal and installation
SIDE OIL SEAL
Removal and Installation
REMOVAL
Remove front drive shafts. Refer to FAX-18, "6M/T : Removal and
Installation (LH)".
Remove differential side oil seals (1) from clutch housing and
transaxle case using a suitable tool.
CAUTION:
Do not damage transaxle case an ...
Steering gear and linkage
Exploded View
REMOVAL
Steering gear assembly
Front suspension member
Front
Removal and Installation
REMOVAL
Set steering wheel to the straight-ahead position.
Remove floor cover (1).
Lower shaft assembly (2).
Remove the lower shaft assembly bo ...
