Nissan Sentra B18 (2020-2025) Service Manual: Additional Service When Replacing Moonroof Motor Assembly
Work Procedure
-
Please observe the following instructions at confirming the moonroof operation.
Note:
Do not disconnect the electronic power while the moonroof is operating or within 5 seconds after the moonroof stops (to wipe-out the memory of lid position and operating friction.)
-
Initialization of system should be conducted after the following conditions:
-
When the moonroof motor is changed.
-
When the moonroof does not operate normally. (Incomplete initialization conditions)
-
Additional Service When Replacing Control Unit
Special Repair Requirement
Special Repair
Requirement
INITIALIZATION PROCEDURE
Moonroof
If the moonroof does not open or close automatically,
use the following procedure to return moo ...
Other materials:
P0890-00 Tcm
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
...
P0106 Manifold Absolute Pressure Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
conditi ...
Hvac branch line circuit
Diagnosis procedure
1.Check connector
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal
Check the terminals and connectors of the a/c auto amp. For damage, bend
and loose connection (unit
side and connector side).
Is the inspection result normal?
...
