Nissan Sentra manuals

Nissan Sentra B18 (2020-2025) Service Manual: Additional Service When Replacing Eps Control Unit

Diagnostic Work Sheet
Diagnostic Work Sheet Description In general, customers have their own criteria for a problem. Therefore, it is important to understand the symptom and status well enou ...

Work Procedure
Work Procedure DESCRPITION When replacing the EPS control unit, the procedures of BEFORE REPLACEMENT and AFTER REPLACEMENT must be performed. For work procedure, refer to the following: ...

Other materials:

Chassis Control
Symptom Table Symptom Table INTELLIGENT TRACE CONTROL Perform the “Self Diagnostic Result” using CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected. Refer to DTC Index. ...

U0140 Lost communication (BCM)
DTC Logic DTC DETECTION LOGIC DTC CONSULT screen terms [Trouble diagnosis content] DTC detection condition Possible causes U0140 LOST COMM (BCM) [Lost Communication With Body Control Module] When the ignition switch is ON, TCM is unable to receive the CAN ...

P0340 CMP Sensor (PHASE)
DTC Logic DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P0340 CMP SEN/CIRC-B1 (Camshaft position sensor “A” circuit bank 1) The cylinder No. signal is not sent to ECM fo ...

© 2014-2026 Copyright www.nisentra.com