Nissan Sentra B18 (2020-2025) Service Manual: Additional Service When Replacing Distance Sensor
Work Procedure
Work Procedure
-
Always perform the distance sensor configuration after replacing the distance sensor.
-
Always perform the radar alignment after removing and installing or replacing the distance sensor.
CAUTION:
The system does not operate normally unless the distance sensor configuration and the radar alignment are performed. Always perform them.
-
Perform the AEB system action test to check that the AEB system operates normally.
-
DISTANCE SENSOR CONFIGURATION
Perform the distance sensor configuration with CONSULT. Refer to Work Procedure.
>>GO TO 2.
-
PERFORM RADAR ALIGNMENT
Perform the radar alignment. Refer to Work Procedure.
>>GO TO 3.
-
AEB SYSTEM ACTION TEST
-
Perform the AEB system action test. Refer to Work Procedure.
-
Check that the AEB system operates normally.
INSPECTION END
-
Other materials:
Basic Inspection
Diagnosis and Repair Workflow
Work Flow
Work Flow
OVERALL SEQUENCE
DETAILED FLOW
GET INFORMATION FOR SYMPTOM
Get detailed information from the customer about
the symptom (the condition and the environment when the
incident/ma ...
P34c8 Electric Intake Valve Timing Control Module
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Noise, Vibration and Harshness (nvh) Troubleshooting. Nvh Troubleshooting Chart
Nvh Troubleshooting Chart
NVH Troubleshooting Chart
Use the chart below to find the cause of the
symptom. If necessary, repair or replace these parts.
...