Nissan Sentra Service Manual: Preparation

Precautions in repairing high strength steel

High strength steel (HSS) High strength steel is used for body panels in order to reduce vehicle weight. Accordingly, precautions in repairing automotive bodies made of high strength steel are ...

Repairing material

Foam Repair During factory assembly, foam insulators are installed in certain body panels and locations around the vehicle. Use the following procedure(s) to replace any factory-installed foam i ...

Other materials:

Garage Jack and Safety Stand and 2-Pole Lift
WARNING: Park the vehicle on a level surface when using the jack. Make sure to avoid damaging pipes, tubes, etc. under the vehicle. Never get under the vehicle while it is supported only by the jack. Always use safety stands when you have to get under the vehicle. Place wheel chock ...

Sensor power supply 2 circuit
Description ECM supplies a voltage of 5.0 V to some of the sensors systematically divided into 2 groups, respectively. Accordingly, when a short circuit develops in a sensor power source, a malfunction may occur simultaneously in the sensors belonging to the same group as the shorted-circui ...

Recommended fluids and lubricants
Fluids and lubricants *1: For additional information, see “engine oil recommendation”. *2: As an alternative to this recommended oil, sae 5w-30 conventional petroleum based oil may be used and meet all specifications and requirements necessary to maintain the new vehicle limited ...