Nissan Sentra manuals

Nissan Sentra Service Manual: Charging system

System Diagram

System Description


System Description

The generator provides DC voltage to operate the vehicle's electrical system and to keep the battery charged.

The voltage output is controlled by the IC regulator.

Component Description

Power generation voltage variable control system


Component parts
Component parts location Generator IPDM E/R (view with air inlet duct removed) ECM Battery current sensor Charge warning lamp indicator Component description Component part ...

Power generation voltage variable control system
System Diagram System Description Power generation variable voltage control system has been adopted. By varying the voltage to the generator, engine load due to power generation of the gener ...

Other materials:

Abs branch line circuit
Diagnosis Procedure 1.Check connector Turn the ignition switch off. Disconnect the battery cable from the negative terminal. Check the terminals and connectors of the abs actuator and electric unit (control unit) for damage, bend and loose connection (unit side and connector side). ...

P0451 EVAP Control system pressure sensor
DTC Logic DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition Possible cause P0451 EVAP SYS PRES SEN (Evaporative emission system pressure sensor/switch range/ performance) ECM detects a sloshing signal fro ...

Normal operating condition
Description FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED) If the engine speed is above 2,500 rpm under no load (for example, the selector lever position is neutral and engine speed is over 2,500 rpm) fuel will be cut off after some time. The exact time when the fuel is cut off varies b ...

В© 2014-2020 Copyright www.nisentra.com