Nissan Sentra B18 (2020-2025) Service Manual: Work Procedure
-
SYSTEM INITIALIZATION
-
Perform system initialization. Refer to Work Procedure.
GO TO 2.
-
-
CHECK ANTI-PINCH FUNCTION
-
Check anti-pinch function. Refer to Work Procedure.
Inspection End.
-
Description
Description
When the main power window and door lock/unlock
switch is replaced, the initialization is necessary for normal
operation of power window system.
CAUTION:
The following s ...
Other materials:
Brake precautions
Vacuum assisted brakes
The brake booster aids braking by using engine
vacuum. If the engine stops, you can stop the
vehicle by depressing the brake pedal. However,
greater foot pressure on the brake pedal will be
required to stop the vehicle and stopping distance
will be longer.
Using the bra ...
Fuel Tank Vacuum Relief Valve
Component Inspection
Component Inspection
CHECK FUEL FILLER CAP
Turn ignition switch OFF.
Remove fuel filler cap.
Wipe clean valve housing.
Install fuel filler ca ...
Main line between dlc and hvac circuit
Diagnosis Procedure
1.Check harness continuity (open circuit)
Turn the ignition switch OFF.
Disconnect the battery cable from the negative terminal.
Disconnect the following harness connectors.
Ecm
A/c auto amp.
Check the continuity between the data link connector and the a/c ...
