Nissan Sentra B18 (2020-2025) Service Manual: Water Pump Housing
Exploded View
Exploded View
|
1. |
Water inlet |
2. |
Thermostat assembly |
3. |
Water pump housing |
|
4. |
Water pump housing gasket |
5. |
Water pump |
6. |
Water pump gasket |
|
7. |
O-ring |
A. |
Refer to Removal and Installation. |
B. |
To reservoir tank. Refer to Exploded View. |
|
C. |
To CVT oil warmer (CVT models only). Refer to Exploded View. To oil cooler (M/T models only). Refer to Exploded View. |
Removal and Installation
Removal and Installation
REMOVAL
Remove the water pump. Refer to Removal and Installation.
Remove the intake manifold. Refer to Removal and Installation.
Disconnect the harness connector from the generator.
Remove the "B" terminal nut and harness. Refer to Exploded View.
Remove bolts and remove the generator. Refer to Exploded View
Remove the radiator hose (lower) from the water inlet.
Remove the reservoir tank hose from the water pump housing.
Remove bolt
(A) and remove bracket (1) from water pump housing. 
Remove water hose A and water hose C from the water pump housing. Refer to Exploded View (CVT models only).
Remove water hose A and water hose B from the water pump housing. Refer to Exploded View (M/T models only).
Remove the fuel rail protector. Refer to Exploded View.
Remove harness retainer from water pump housing.
Remove water pump housing bolts and remove the water pump housing.
CAUTION:
Do not reuse gasket.
Remove the water inlet and thermostat assembly from the water pump housing (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
Other materials:
Tire pressure
Tire Pressure Monitoring System (TPMS)
WARNING
Radio waves emitted by the Tire Pressure Monitoring System (TPMS) may adversely
affect certain types of electronic medical equipment.
Individuals who use a pacemaker or other implanted medical devices should
contact the medical equipment manufact ...
Cvt
Exploded View (lh)
Exploded View
(LH)
LH
1.
Circular clip
2.
Slide joint housing
3.
...
Cold weather driving
Freeing a frozen door lock
To help prevent the door locks of your Nissan Sentra from freezing in cold weather,
apply a suitable de-icing agent directly into the keyhole. If a lock does become
frozen, gently warm the mechanical key before inserting it into the keyhole. As
an alternative, use t ...