Nissan Sentra B18 (2020-2025) Service Manual: U2150-87 Can Comm Err (air Bag)
Dtc Description
DTC Description
DESCRIPTION
CAN (Controller Area Network) is a serial communication line for real time applications. It is an on-Nissan Sentra vehicle multiplex communication line with high data communication speed and excellent error detection ability. Modern Nissan Sentra vehicle is equipped with many electronic control unit, and each control unit shares information and links with other control units during operation (not independent). In CAN communication, control units are connected with 2 communication lines (CAN-High line, CAN-Low line) allowing a high rate of information transmission with less wiring. Each control unit transmits/receives data but selectively reads required data only. CAN Communication Signal Chart. Refer to CAN Communication Signal Chart.
DTC DETECTION LOGIC
|
DTC No. |
CONSULT screen items (Trouble diagnosis content) |
DTC Detection Condition |
|
|---|---|---|---|
|
U2150–87 |
CAN comm err (AIR BAG) [CAN communication error (air bag)] |
Diagnosis condition |
Ignition switch ON |
|
Signal (terminal) |
CAN communication signal |
||
|
Threshold |
Transmission error or reception error |
||
|
Diagnosis delay time |
2 second or more |
||
POSSIBLE CAUSE
CAN communication system
FAIL-SAFE
—
Dtc Confirmation Procedure
DTC Confirmation Procedure
-
DTC CONFIRMATION
-
CONSULT-
Ignition switch ON and wait for 2 seconds or more.
-
Select “Self Diagnostic Result” mode of “BCM”.
-
Is DTC detected?
YES >>Refer to DTC Diagnosis Procedure.
NO >>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO >>Confirmation after repair: Inspection End.
-
Dtc Diagnosis Procedure
DTC Diagnosis Procedure
-
CHECK CAN COMMUNICATION
-
Check CAN communication. Refer to Trouble Diagnosis Flow Chart.
Is DTC “U2150–87” detected?
YES >>Repair or replace the malfunctioning part.
NO >>Inspection End.
-
Other materials:
P01f0 Engine Coolant Temperature
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
High Pressure Fuel Pump
Component Function Check
Component Function Check
CHECK HIGH PRESSURE FUEL PUMP
FUNCTION
With CONSULT
Start engine.
Select “FUEL PRES SEN V”
in “DATA MONITOR” mode of
“ENGINE” usi ...
Trunk Opener Request Switch
Component Function Check
Component Function Check
CHECK FUNCTION
CONSULT
Select "Request switch BD/TR" in "Data Monitor"
mode of "BCM(TRUNK)".
Select that the functi ...