S Nissan Sentra Manuals Library
Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Quick access Sentra Docs
B18 Owner's 2020-2025 Sentra owner information B18 Service 2020-2025 Sentra Workshop manual B17 Owner's 2013-2019 Sentra owner documentation B17 Service 2013-2019 Sentra service information

Nissan Sentra B18 (2020-2025) Service Manual: U1010-49 Control Unit(can)

Dtc Description

DTC Description

DTC DETECTION LOGIC

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detection condition

U1010-49

CONTROL UNIT(CAN)

[Control unit (CAN)]

Diagnosis condition

Ignition switch ON

Signal (Terminal)

—

Threshold

Detecting error during the initial diagnosis of CAN controller of A/C amp.

Diagnosis delay time

1 seconds or more

POSSIBLE CAUSE

A/C amp.

FAIL-SAFE

—

Confirmation Procedure

Confirmation Procedure

  1. PERFORM SELF DIAGNOSTIC RESULT

    1. CONSULT

      1. Ignition switch ON.

      2. Select “Self Diagnostic Result” mode of “HVAC”.

      3. Check DTC.

    Is DTC detected?

    YES >>

    Refer to DTC Diagnosis Procedure.

    NO >>

    To check malfunction symptom before repair: Refer to Intermittent Incident.

    NO >>

    Confirmation after repair: Inspection End.

Dtc Diagnosis Procedure

DTC Diagnosis Procedure

  1. REPLACE A/C AMP.

    1. Replace A/C amp. Refer to Removal and Installation.

    >>

    Inspection End.

    B24f5-93 Mode Door Motor
    Dtc Description DTC Description DTC DETECTION LOGIC Note: If all of door motors DTC (B24F5-93, B24F6-93, B24F7-93) are detected, check “DOOR MOTOR CIRCUIT”. Refer to Diagnos...
    U2140-87 Can Comm Err (ecm)
    Dtc Description DTC Description DESCRIPTION CAN (Controller Area Network) is a serial communication system for real time application. It is an on-Nissan Sentra vehicle multiplex...

    Other materials:

    Service Data and Specifications (sds). Service Data and Specifications (sds)
    Service Data and Specifications (sds) Bulb Specifications Bulb Specifications Item Wattage (W)* Bulb No. Front combi ...

    Before Replacing ECM
    SAVE ECM DATA With CONSULT Turn ignition switch OFF. Reconnect all harness connectors disconnected. Turn ignition switch ON. Select “SAVING DATA FOR REPLC ...

    Intelligent Key System All Functions Cannot Operate (one Key)
    Description Description Intelligent Key system all functions cannot operate (door lock and engine start). (One Intelligent Key has the symptom, other keys operate normally.) SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE SYMPTOM, OTHER KEYS OPERATE NORMALLY) ...