Factory-style information for owners and repair work

Nissan Sentra techinfo

Find Nissan Sentra owner information, maintenance instructions, technical references, service procedures and useful repair pages in one clean online library.

Nissan Sentra B18 (2020-2025) Service Manual: Intelligent Key System All Functions Cannot Operate (one Key)

Description

Description

Intelligent Key system all functions cannot operate (door lock and engine start). (One Intelligent Key has the symptom, other keys operate normally.)

SYMPTOM TABLE (ONE INTELLIGENT KEY HAS THE SYMPTOM, OTHER KEYS OPERATE NORMALLY)

Door lock operation (remote keyless entry)

Door lock operation (request switch) or trunk open operation (opener switch of trunk lid)

Engine started with push-button ignition switch operation (Intelligent Key is within the detection area of inside key antenna)

Engine started with push-button ignition switch operation (registered Intelligent Key placed next to push-button ignition switch)

NG

NG

No crank, No start

No crank, No start

DIAGNOSIS PROCEDURE

Refer to Diagnosis Procedure.

Diagnosis Procedure

Diagnosis Procedure

  1. CHECK INTELLIGENT KEY SYSTEM SYMPTOM TABLE

    1. Check Intelligent Key system symptom table.

      Refer to Diagnosis Procedure.

    >>

    GO TO 2.

  2. CHECK INTELLIGENT KEY-1

    1. For Intelligent Key that cannot be used for door lock and unlock, check that the Intelligent Key belongs to the Nissan Sentra vehicle to be checked.

    Does the Intelligent Key belong to the vehicle to be checked?

    YES >>

    GO TO 3.

    NO >>

    Check Intelligent Key button operation using a registered Intelligent Key that belongs to the Nissan Sentra vehicle.

  3. CHECK INTELLIGENT KEY-2

    1. Check the inside of the Intelligent Key for rust or corrosion by water. Simultaneously check the internal circuits for damage.

    Is the inspection result normal?

    YES >>

    GO TO 4.

    NO >>

    Replace Intelligent Key.

  4. REGISTER INTELLIGENT KEY

      1. Register the Intelligent Key again.

      2. Check the operation after replacement.

    Is the inspection result normal?

    YES >>

    Inspection End.

    NO >>

    GO TO 5.

  5. REPLACE INTELLIGENT KEY

      1. Replace the Intelligent Key and perform registration again.

      2. Check operation after replacement.

    Is the inspection result normal?

    YES >>

    Inspection End.

    NO >>

    GO TO 6.

  6. REPLACE INTELLIGENT KEY UNIT

      1. Replace Intelligent Key unit. Refer to Removal and installation.

      2. Check operation after replacement.

    Is the inspection result normal?

    YES>>

    Inspection End.

    NO>>

    Check intermittent incident. Refer to Intermittent Incident.

    Door Does Not Lock/unlock and Engine Does Not Start (one I-Key/req Sw/push Sw)
    Description Description All doors do not lock/unlock using door request switch or trunk does not open using trunk opener request switch, Intelligent Key, and engine does not sta...
    Intelligent Key Button Operation Has Poor Range (one Key)
    Description Description Intelligent Key button operation has poor range. (One Intelligent Key has the symptom, other keys operate normally.) SYMPTOM TABLE (ONE INTELLIGENT KEY H...

    Other materials:

    C106e-54 Steering Angle Sensor
    Dtc Description DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen item (Trouble diagnosis content) DTC detection condition ...

    Symptom Diagnosis. Push-Button Ignition Switch Does Not Operate
    Push-Button Ignition Switch Does Not Operate Diagnosis Procedure Diagnosis Procedure Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check each symptom. Note: The engine start function, door lock function, power dis ...

    Intelligent Key System All Functions Cannot Operate (all Keys)
    Description Description Intelligent Key system all functions cannot operate (door lock and engine start). SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS) Door lock operation (remote k ...