Nissan Sentra B18 (2020-2025) Service Manual: Srs Final Check
DIAGNOSIS MODE
CONSULT
-
Confirm that zero point reset of OCS is complete.
-
If no DTCs are detected on “Self Diagnostic Result [CURRENT]”, repair of SRS is completed. Go to step 3.
If any DTCs are detected on “Self Diagnostic Result [CURRENT]”, the malfunction has not been repaired completely or another malfunction is being detected. Perform SRS Operation Check again. Refer to On Board Diagnosis Function.
-
Select “ERASE”.
Note:
Selecting “ERASE” will clear the SRS memory of the malfunction (“Self Diagnostic Result [PAST]”). If “Self Diagnostic Result [PAST]” is not erased, User Mode may show the previous system malfunction even if the malfunction has been repaired completely.
-
Check that no malfunction is detected in “Self Diagnostic Result [PAST]”.
-
Exit Diagnosis Mode and disconnect the CONSULT.
-
Perform SRS Operation Check. Refer to On Board Diagnosis Function.
Srs History Check
SRS History Check
SRS HISTORY CHECK
Check repair history of the SRS. If no repairs
have been made, perform On Board Diagnosis Function. If repairs have
been made, GO TO ...
Consult Function (air Bag)
CONSULT Function (AIR BAG)
CONSULT performs the following functions:
Diagnosis mode
CGW Sta ...
Other materials:
Ecu diagnosis information
Audio unit
Reference value
TERMINAL LAYOUT
PHYSICAL VALUES
Bose speaker amp
Reference value
TERMINAL LAYOUT
PHYSICAL VALUES
BluetoothВ® control unit
Reference value
TERMINAL LAYOUT
PHYSICAL VALUES
...
Additional Service When Replacing Av Control Unit
Work Procedure
Work Procedure
CAUTION:
During the procedure, maintain the following
conditions:
Connect the AC adapter to the CONSULT.
Connect the CONSULT to the internet (Wi-Fi or
cable).
Make sure that ASIS ...
Diagnosis description : malfunction indicator lamp (MIL)
When emission-related ECU detects a malfunction in the emission
control systems components and/or the powertrain control components
(which affect vehicle emissions), it turns on/blinks MIL to
inform the driver that a malfunction has been detected.
The MIL illuminates when ignition switch is t ...
