Diagnosis Procedure
CHECK CONNECTOR
Turn the ignition switch OFF.
Check the terminals and connectors of the side radar RH for damage, bend and short (unit side and connector side).
Is the inspection result normal?
YES >>GO TO 2.
NO >>Repair the terminal or connector.
CHECK CONTINUITY OF RIGHT/LEFT SWITCHING SIGNAL CIRCUIT
Disconnect side radar RH connector.
Check continuity between side radar RH harness connector and ground.
|
Side radar LH |
Ground |
Continuity |
|
|
Connector |
Terminal |
||
|
B253 |
8 |
Yes |
|
|
Side radar RH |
Ground |
Continuity |
|
|
Connector |
Terminal |
||
|
B254 |
2 8 |
Yes |
|
Is the inspection result normal?
YES >>Inspection End.
NO >>Repair harness or connector.
Power Supply and Ground Circuit
Driver Assistance Buzzer CircuitEngine Oil
Inspection
Inspection
ENGINE OIL LEVEL
Note:
Before starting engine, put Nissan Sentra vehicle horizontally
and check the engine oil level. If engine is already started, stop
it and allow 10 minutes before checking.
Pull out
oil level gauge and wipe it clean.
Insert oil
...
Combination Meter
Values on the Diagnosis Tool
Values on the
Diagnosis Tool
Note:
The following table includes information (items)
inapplicable to this Nissan Sentra vehicle. For information (items) applicable to
this vehicle, refer to CONSULT display items.
...
P0192 Frp Sensor
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...