Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation - Without Drum Brake
REMOVAL
Remove the rear brake caliper assembly and disc rotor. Refer to Removal and Installation.
CAUTION:
Do not depress brake pedal while rear brake assembly is removed.
Remove the rear wheel sensor bolt and the rear wheel sensor. Refer to Exploded View.
Remove the hub bolts and wheel hub assembly.
CAUTION:
Do not remove parking brake assembly. Protect it from falling.
INSTALLATION
Installation is in the reverse order of removal.
-
Align the matching marks that have been made during removal when reusing the disc rotor.
-
Check that the wheel hub assembly operates smoothly.
-
Perform inspection after installation. Refer to Inspection.
Exploded View - Without Drum Brake
Exploded View
- Without Drum Brake
1.
Rear knuckle
...
Inspection
Inspection
INSPECTION AFTER REMOVAL
Check the
wheel hub assembly for wear, cracks, and damage.
Replace if
necessary.
INSPECTION AFTER INSTALLATION
Check wheel sensor harness fo ...
Other materials:
P0500 Vss
Dtc Description
DTC Description
ECM receives vehicle speed signals from two different paths via
CAN communication line: One is from the ABS actuator and electric unit (control
unit) via the combination unit and the other is from TCM.
DTC DETECTION LOGIC
...
Engine cooling system
The engine cooling system of the Nissan Sentra is factory-filled with a pre-diluted
mixture consisting of 50% Genuine NISSAN Long Life Antifreeze/Coolant (blue) and
50% water. This formulation is designed to provide reliable, year-round antifreeze
protection and effective engine cooling perfor ...
Primary speed sensor
Exploded View
Transaxle assembly
O-ring
Primary speed sensor
: Always replace after every
disassembly.
: N m (kg-m, in-lb)
: Genuine NISSAN CVT Fluid NS-3
Removal and Installation
REMOVAL
Disconnect the primary speed sensor connector.
Remove the primary speed sensor.
...
