Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation (battery)
REMOVAL
Disconnect battery. Refer to Battery Disconnect.
CAUTION:
To prevent damage to the parts, disconnect the battery negative terminal first.
Remove battery cover from battery.
Remove bolt and battery bracket from battery tray.
Remove battery.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
To prevent damage to the parts, connect the battery positive terminal first.
-
Ensure battery cables are tightly clamped to battery terminals for good contact.
-
Check battery terminal for poor connection caused by corrosion.
-
Perform "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL". Refer to Special Repair Requirement.
Battery Disconnect
Battery Disconnect
Warning:
Battery acid and battery acid fumes are extremely
dangerous and can cause severe burns and explosion. To help reduce
the risk of personal injury:
...
Battery Tray
...
Other materials:
Removal and installation
OIL COOLER
Exploded View
M/T models
Clamp
Water hose
Clamp
Water hose
Oil cooler
O-rings
CVT models
Clamp
Water hose
Clamp
Water hose
Water hose clip
Oil cooler
Clamp
Water hose
O-rings
To CVT oil warmer
Removal and Installation
REMOVAL
Re ...
Dtc Confirmation Procedure
DTC Confirmation
Procedure
PERFORM DTC CONFIRMATION
CONSULT
Ignition switch ON.
CAUTION:
Never start the engine.
...
Exploded View
Exploded View
1.
Brake caliper body
2.
Slide pin
3.
Slide pin boot
...
