REMOVAL
Remove front bumper fascia. Refer to Removal and Installation.
Remove screws (A) and clips (B). 
Release pawls and pull front grille
forward to remove from front bumper fascia.
: Pawl
Remove front emblem (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
Exploded ViewRemoval and Installation
Removal and Installation
Warning:
Before servicing the SRS, place the ignition
switch in the OFF position, disconnect both battery terminals then
wait at least three minutes.
Always work from the side of the driver air bag
...
Normal Operating Condition
Symptom Description
Symptom Description
FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED)
If the status of that the engine speed is above 2,500 rpm under no
load (at 0 km/h and the selector lever position is P or N) takes more than the
specified time, fuel will be cut off after s ...
License Plate Lamp
Exploded View
Exploded View
1.
License plate
lamp
Clip
Removal and ...