Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
REMOVAL
Remove the front room/map lamp assembly. Refer to Removal and Installation.
Using a suitable tool, release the pawls and remove the moonroof switch assembly finisher. Refer to Exploded View.
Using a
suitable tool, release the pawls and remove the moonroof switch
assembly (1). 
:
Pawl
INSTALLATION
Installation is in the reverse order of removal.
Other materials:
Key interlock cable
Exploded View
Shift selector assembly
Clip
Key interlock cable
Clip
Key cylinder
Removal and Installation
REMOVAL
CAUTION:
Always apply the parking brake before performing removal and
installation.
Remove the steering column cover, and the instrument lower panel LH.
R ...
Diagnosis Procedure
Diagnosis Procedure
CHECK AIR BAG MODULE AND SEAT BELT
PRE-TENSIONER
Check the deployment of air bag module.
Is air bag module deployed?
YES >>
Replace the malfunctioning parts.
NO >>
GO TO 2.
...
Nvh Troubleshooting Chart
NVH Troubleshooting Chart
Use the chart below to find the cause of the
symptom. If necessary, repair or replace these parts.
...
