Nissan Sentra B18 (2020-2025) Service Manual: Removal and Installation
CAUTION:
Use a shop cloth to protect the body from being damaged during removal and installation.
REMOVAL
Remove the front door. Refer to Removal and Installation.
Remove front combination lamp (LH/RH). Refer to Removal and Installation (HALOGEN HEADLAMP) or Removal and Installation (LED HEADLAMP).
Remove fender protector to fender clips. Refer to Exploded View.
Remove front fender side trim cover.
Remove cowl top side trim cover.
Remove front fender bolts.
Release front fender upper spacer from body side by cutting foam, then remove front fender.
CAUTION:
Use care when removing the front fender. The front fender upper spacer (1) adheres to the front fender and body side with foam. Carefully release the foam or front fender may be damage.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
-
After installation apply touch up paint (body color) to the head of front fender bolts.
-
After installation, adjust the following components as necessary:
-
Hood assembly: Refer to Adjustment.
-
Front door: Refer to Adjustment.
-
Exploded View
Exploded View
1.
Cowl top side trim cover
2.
...
Front Door
...
Other materials:
U1010 Control unit (CAN)
Description
Air bag diagnosis sensor performs self-tests on key ON. If CAN communication
failure within control unit is
detected, DTC is set.
DTC Logic
DTC DETECTION LOGIC
CONSULT name
DTC
DTC detecting condition
Repair order
CAN CONTROL UNIT FAILURE
U1010
CAN ...
P0448 Evap Canister Vent Control Valve
Dtc Description
DTC Description
DTC DETECTION LOGIC
DTC
CONSULT screen terms
(Trouble diagnosis
content)
DTC detection
condition
...
Except 6M/T
EXCEPT 6M/T : Exploded View
Circular clip
Dust shield
Slide joint housing
Snap ring
Spider assembly
Boot band
Boot
Shaft
Damper band
Dynamic damper
Circular clip
Joint sub-assembly
Wheel side
Joint sub-assembly
Circular clip
Boot band
Boot
Shaft
Da ...
